E-WMS

E-WMS scanner settings - Stock information

WMS documentation

Introduction

This document describes the hand terminal settings for E-WMS Stock information in menu System, E-WMS, Scanners, Stock info settings, as per product update 409.

Description

Once scanner settings are defined, these need to be assigned to each device in menu System, E-WMS, Scanners, Scanners. You can use one general settings profile for all devices, or you can set up specific profiles per individual device. Please also read document General notes on scanner settings. This specific settings screen is available from product update 405, for E-WMS ASP only. You can read more about using the stock information screen on the scanner in this document.

After selecting menu System, E-WMS, Scanners, Stock info settings you can create a new profile by pressing New, or edit an existing profile by using Open. You can only delete profiles which are not linked to devices.
After creating a profile for 'stock info settings', you still have to link this profile to the scanners.

Name
Unique code referring to this settings profile (12 characters).

Description
Description of this settings profile (60 characters).

General section

Screen layout
ASP and WMSclient only. Please read this section for more information on 'screen layout'.

Bar code section

Use EAN128
When enabled, EAN128 decoding will be started, which may be needed when scanning a SKU number or EAN128 bar code in this screen. Please also read: how to activate EAN128 barcode scanning in WMS ASP.

Focus to next field
ASP only. Please read this document for more information on this setting. This setting is available in this screen from release 409, in earlier releases this was a general scanner setting.

Warehouse section

Default value
You can configure a default warehouse, or leave this value empty.

Display which value?
This setting determines how the 'warehouse' field is prefilled on the hand terminal:

Default value: prefills the 'default value' on the hand terminal, but the warehouse code can still be changed on the scanner
Never: prefills the 'default warehouse' code on the scanner and skips input
Empty: the warehouse code will be empty on the hand terminal, and the user has to enter a warehouse code.

Location section

Location/Default value
You can configure a default warehouse location, or leave this value empty.

Location/Display which value?
This setting determines how the 'location' field is prefilled on the hand terminal:

Default value: prefills the value from 'default value' on the hand terminal, but the location code can still be changed
Never: prefills the 'default value' and skips input on the scanner
Empty: the location code will be empty on the scanner, and the user has to scan a warehouse location code.