One moment please...
 
 
Exact Synergy   
 

System Requirements for Exact Synergy Product Update 420

These are the system requirements for product update 419 of the ASP technology version of Exact Synergy. Please be informed that third party software products such as Microsoft Windows, Microsoft Office, and Microsoft SQL Server have their own system requirements which might be different from the system requirements of Exact Synergy. For more information, see the following:

Microsoft Support Lifecycle Policy

System Requirement Start page

Note: MSXML 6.0 should be shipped with Microsoft SQL Server 2012, Visual Studio 2012, .NET Framework 3.0 and Windows 7. MSXML 6.0 is required for Exact Synergy to work from product update 396 onwards. MS Exchange 2010 is not supported.   

Workstation
  Minimal system requirements
Operating system
Windows 7 ** limited support, see document 21.685.523
MS Internet Explorer version Microsoft Internet Explorer 11.0 ** limited support, see document 21.685.523
MS Office version Microsoft Office 2010 ** limited support, see document 21.685.523
Monitor resolution Screen resolution of 1024x768
Internal memory 64 MB
 
Server software
  Minimal system requirements
Operating system
(Webserver + Databaseserver)

Microsoft Windows Server 2008 R2 (64-bit)
+ latest service pack

For Microsoft Windows Server 2008 R2, the 32-bit mode must be enabled in IIS7 if you are using the 64-bit architecture. For more information, see Product Update 396: Exact Synergy Supports Windows Server 2008 R2

or

Microsoft Small Business Server

+ latest service pack

Supported versions: Small Business Server 2011

Database system
(Databaseserver)
Microsoft SQL Server 2012
+ latest service pack
or
Microsoft SQL Server 2014
+ latest service pack
or
Microsoft SQL Server 2016
+ latest service pack
or
Microsoft SQL Server 2017
+ latest service pack 

or
Microsoft SQL Server 2019
+ latest service pack 
Productivity
(Webserver)
Microsoft Office 2007
 
Network and security
  Microsoft Internet Information Server uses the standard Internet protocol TCP / IP to communicate with the client browsers. A client needs a minimal connection speed of 56.6 Kb connection to acquire acceptable performance although lower connection speeds do not directly affect the integrity of the application. A connection between a client and the Application Server can be set up directly using a local area network, but a global infrastructure like the Internet can be used just as well. When separate Application Servers are used, they should be connected to the Database server with a 100 Mb local area network connection.
  The Internet, and all its related products, is commonly referred to as 'insecure'. This is directly related to the open nature of its technology which is in fact one of its greatest benefits. When implementing Exact Synergy, a number of strict security policies must be maintained to protect both the application software and data against malicious acts. Total system security includes various types of safety measurements, each with their own characteristics and demands for maintenance. The necessary security policies are not limited to the Exact Synergy application alone; the integrity of all elements of the entire system must be assured.
  Exact Synergy data traffic is vulnerable along the entire path between the Client and the Application Server (and even up to the Database Server). This means that all traffic paths, the data source, the data destination and data storage have to be protected. The best way to do this is to use data encryption (HTTPS) for the Exact Synergy Application Server and install a firewall to separate the company's Local Area Network (LAN) from the Demilitarized Zone (DMZ) (with the public web servers) and the Internet. For more information about this issue, read security checklist of Exact Synergy.

 

Server hardware requirements for 1-50 connections

The application is installed as a program on the IIS web server and all data is stored in a SQL database, which is stored on a Microsoft SQL Database Server . Both the IIS web server and the SQL database can be installed on the same machine in small Exact Synergy implementations (up to 50 concurrent connections).

Single server setup
  Minimal system requirements Recommended system requirements
Processor 1 x Pentium III 600 MHz 2 X Intel Xeon 3.4 GHz
Internal memory 512 MB 2 GB
Hard disk IDE 10 GB SCSI 72 GB (Raid 5)

 

Server hardware requirements for 50-150 connections

When more connections are required or the use of a large database can be expected, the IIS web server should be installed on a single separate machine (suitable for up to 150 connections). This results in a setup with an Application Server (IIS + Exact Synergy) and a separate Database Server (SQL). Note that the Client only communicates with the Application Server (IIS).

Dual server setup - Internet Information Server
  Minimal system requirements Recommended system requirements
Processor 1 x Pentium III 700 MHz 2 X Intel Xeon 3.4 GHz
Internal memory 512 MB 1,5 GB
Hard disk IDE 6 GB SCSI 18 GB
Dual server setup - Microsoft SQL Server
  Minimal system requirements Recommended system requirements
Processor 1 x Pentium IV 1 GHz 2 X Intel Xeon 3.4 GHz
Internal memory 1 GB 2 GB
Hard disk SCSI 50 GB SCSI 72 GB (Raid 5)

 

Server hardware requirements for 150-500 connections

When dealing with even more concurrent connections, the workload of the application server can be divided over several Application Servers. This results in a more reliable situation with better performance. A dedicated piece of hardware, the "load balancer", can divide all traffic among several (up to 50 or more concurrent connections) Application Servers which all connect to the same database server to store and retrieve data.

Multi server setup - Internet Information Server (Multiple)
  Minimal system requirements Recommended system requirements
Processor 1 x Pentium III 700 MHz 2 X Intel Xeon 3.4 GHz
Internal memory 512 MB 2 GB
Hard disk IDE 6 GB SCSI 18 GB
 
Multi server setup - Microsoft SQL Server
  Minimal system requirements Recommended system requirements
Processor 1 x Pentium IV 1 GHz 2 X Intel Xeon 3.4 GHz
Internal memory 1 GB 4 GB
Hard disk SCSI 80 GB SCSI 144 GB (Raid 5)
 
Load balancer
For example Foundry Server Iron Load balancer (8 ports)

 

General requirements

  • Regularly backup the administrations/databases and store the backup on a different media device (not the machine where the Microsoft SQL Server is installed).
  • Perform regular database maintenance.
  • For support of Exact Globe, Exact Synergy, and Exact Synergy Enterprise virtualizing Microsoft SQL Server on a Storage Area Network, see document 21.603.931.
  • Exact Synergy has been tested in a VMware environment.
  • Use scalable hardware.
  • In a network environment a Microsoft Active Directory (domain) needs to be present. The workstations, the SQL Server, and the Windows Terminal Server need to be part of the same active directory.
  • The system requirements are based on the usage of Exact Synergy only, if other applications are used on the same machines, the requirements should be increased.
  • Every new service pack is supported automatically by Exact, unless explicitly announced otherwise.
  • If a solution utilized uses the Exact Entity Service from Exact Globe Next, the Exact Entity Service must run on a separate machine where Microsoft SQL Server is not running.
  • Internet connection is mandatory for Exact Synergy. 

Related documents

     
 Main Category: Attachments & notes  Document Type: Online help main
 Category:  Security  level: All - 0
 Sub category:  Document ID: 29.524.113
 Assortment:  Date: 26-06-2020
 Release: 420  Attachment:
 Disclaimer