Introduction

This document describes a sample scenario of Autoreceive.

Description

This document describes a sample for scenario '7b' in document E-WMS - Autoreceive: Receiving a batch item, using E-WMS SKU numbers, and a batch number range as defined by your supplier.

In the hand terminal settings for receipts (menu System, E-WMS, Scanners, Receipts registration settings), the following settings apply:

• Use external SKU nrs = enabled
• S/B number generaton = disabled
• Autoreceive = enabled

In item maintenance, WMS button, the item has a default SKU configuration (100 per pallet) linked.

   

Started the receipt, scanned item and location. At 'Outer SKU', press the Options button.	Press Auto receive	Enter the quantity in sales units to be received (3000 in this case, 30 SKUs)
Enter the number of sales units per unique batch number, in this case '1000', which results in 3 new batches (1 batch per 10 SKUs)	Enter or scan the first suppliers batch number	Confirm the increment factor for the next batch numbers to generate
Enter the batch 'best before date' (depending the scanner settings for batch date registration)	Scan the first suppliers SKU number	Confirm the increment factor for the next 29 SKU numbers to generate
The numbers and receipt lines are generated ...	... and 3000 sales units are received. You can press STOP (2x) and 'Order is done' to end the receipt.
After reading back the generated receipt manually, you can open the receipt to view the batch- and SKU numbers.

Related documents

• E-WMS - Autoreceive
• E-WMS start page