This document describes the functionality of E-WMS SSCC Shipment Tracing,
as per product update 409.
SSCC Shipment Tracing, introduced in release 405, offers the possibility to track & trace
fulfillments done with E-WMS and when using SSCC registration.
With SSCC Shipment Tracing you can:
Shipment Tracing has no Control Center as other WMS processes do, since this
is an scanner application only. There is a report available to view SSCC
Autopack or Shipment Builder is not required to use SSCC Shipment Tracing,
but you could use SSCC Shipment Tracing for SSCC numbers generated in Autopack.
Typically, Autopack will be used when not using hand terminals for order
picking, and SSCC Shipment Tracing can only be used on hand terminals.
To provide access to the ASP scanner menu for SSCC Shipment Tracing scanning, you
first need to enable
the setting 'SSCC shipment tracing' in menu System, E-WMS,
Scanners, General scanner settings.
Next, you can configure the functionality of SSCC Shipment Tracing in menu
System, E-WMS, Scanners, SSCC shipment tracing settings.
This document describes these hand terminal settings.
When general hand terminal setting 'SSCC Shipment tracing' is enabled, SSCC Shipment Tracing is integrated
as submenu in ASP hand terminal menu Orders. Select menu
'Orders, Shipments' to show the submenu:
Scan shipment: this menu allows you
to scan SSCC's and link these to shipment numbers. The shipment number is either
scanned or automatically generated.
Select shipment: this menu allows you to
first select a previously scanned shipment number and continue scanning for that
When SSCC Shipment Tracing is enabled, you will have to
select one extra menu to start order picking.
For order picking or packing, please select menu 'Orders, Order picking'
Depending on your configured hand terminal settings, you can scan the
following fields in ASP menu Orders, Shipments, Scan Shipment:
The following fields can be scanned repeatedly, depending on the hand
terminal setting 'Focus to':
The 'browse button' behind the SSCC number will show a list of SSCC
numbers from WMS order history, from the same delivery debtor and delivery
date, that are not scanned yet.
All lines are scanned
Following message will show after you scanned the last SSCC
for the shipment you were working on:
This message will only show when the scanner setting 'Validate complete
shipment' is enabled.
When pressing the STOP button you can indicate that you are done. A shipment
is however not set to 'ready' as would be usual with other WMS
transactions like orderpicking, you can continue scanning for the same shipment
When the hand terminal setting 'Validate: shipment complete' was enabled, and
there are still SSCC's in WMS order history for the same delivery debtor and
delivery date which are not scanned now, you will see the message "There
are still SSCC numbers missing for this shipment. Do you still wish to stop
OPTIONS / EDIT and DELETE button
After scanning one or more SSCC's, you can view, edit or delete the scanned
The options menu can be used during scanning, or you can use hand
terminal menu 'Select shipment' to view or edit an existing shipment.
A report is provided to select and report the scanned shipments. Please refer
this document for more details.